1
/
of
3
Tinmorry
TINMORRY PA6-CF Carbon Fiber Nylon ā 1.75mm 1kg | Tested Settings
TINMORRY PA6-CF Carbon Fiber Nylon ā 1.75mm 1kg | Tested Settings
Regular price
$29.99 USD
Regular price
Sale price
$29.99 USD
Quantity
Couldn't load pickup availability
TINMORRY PA6-CF ā carbon fiber reinforced PA6 nylon. PA6 is the same nylon family used in automotive factory parts, and the carbon fiber makes it stiff and strong enough for functional parts that take real abuse.
Best for...
- Strength & stiffness ā carbon fiber reinforcement, holds up under load
- Heat resistance ā PA6 handles hot environments, no sagging
- Wear resistance ā tough against abrasion and impact
- Functional parts ā brackets, mounts, jigs, tooling
šØļø Recommended Settings
| Nozzle Temp | 270ā290Ā°C | (start 280Ā°C) |
| Bed Temp | 90ā100Ā°C | (PVA glue stick) |
| Chamber | Enclosed, 50Ā°C+ | ā ļø open printers warp badly |
| Dry Before Print | 80Ā°C / 6-8h | ā ļø mandatory ā PA6 is hygroscopic |
| Nozzle | 0.4ā0.6mm hardened steel | ā ļø carbon fiber wears brass |
| Cooling | 0ā15% | (minimal) |
Our Take
PA6-CF sits between PAHT-CF and PPA-CF ā cheaper than PPA, tougher than PETG. It's the value pick for parts that need real strength without breaking the bank. TINMORRY's spools are consistently good in our experience, and at this price it's one of the best bang-for-buck engineering filaments out there.
Affiliate link ā you pay the same price, we earn a small commission that keeps our testing free.
Share
