1
/
of
2
Inslogic
Inslogic PA12-CF Engineering Filament ā Carbon Fiber Nylon | Tested Settings
Inslogic PA12-CF Engineering Filament ā Carbon Fiber Nylon | Tested Settings
Regular price
$77.99 USD
Regular price
Sale price
$77.99 USD
Quantity
Couldn't load pickup availability
Inslogic PA12-CF ā carbon-fiber-reinforced nylon built for real parts. The same material class as factory automotive components: stiff, tough, heat-resistant, and it shrugs off oil and brake cleaner.
š„ EXCLUSIVE DISCOUNT ā CODE: KAIZEN20
Save at checkout on Inslogic's official store using code KAIZEN20 ā only for Engineering Filament Lab readers.
Best for...
- Heat resistance ā holds up at sustained high temps, no sag in hot enclosures
- Impact & strength ā carbon fiber makes it stiff without being brittle
- Chemical resistance ā oil, coolant, brake fluid, degreaser won't hurt it
- Dimensional stability ā low warp, prints accurate parts that stay accurate
šØļø Our Tested Settings
| Nozzle Temp | 280ā300Ā°C | (start 290Ā°C) |
| Bed Temp | 100ā110Ā°C | (PVA glue stick / build plate) |
| Chamber | 55ā60Ā°C | (enclosed printer) |
| Dry Before Print | 80Ā°C / 8h | ā ļø mandatory ā nylon absorbs moisture |
| Nozzle | 0.4ā0.6mm hardened steel | ā ļø carbon fiber wears brass |
| Flow Ratio | 0.96ā1.00 | (calibrate) |
| Cooling | 0ā10% | (minimal) |
| Speed | 40ā80 mm/s | (walls slower than infill) |
| Retraction | 1ā2mm | (direct drive) |
Why We Recommend It
PA12-CF is the sweet spot for functional parts ā stronger than plain nylon, easier than PEEK, and priced for real use. Inslogic's spools are consistently dry and well-wound in our experience.
š Buy Inslogic PA12-CF ā Use Code KAIZEN20
Affiliate link ā you pay the same price, we earn a small commission that keeps these tests free.
Share
